Kustom Grit Set

Description

This set comes with:

Kustom Grit Superfine Abrasive

Kustom Grit Mircofine Abrasive

Kustom Grit Step 1

170mls
Kustom Grit Step 1: After sanding to desired grit
apply Kustom Grit Step 1 with paper towel or cloth to
the work piece.
Use a cloth or Buffing pad to work the product into the piece.
After buffing use a clean piece of paper towel or cloth to wipe
any excess Kustom Grit from the work piece before moving
onto Kustom Grit Step 2 as Step 2 is a finer grade grit.
(For best results sand to the highest grit before using
Kustom Grit. 2000 Grit will give a glass like finish.
Great results are achieved anywhere from 400 Grit.
Using a buffing pad will give the best finish.
Kustom Grit can be applied by hand)

Kustom Grit Can be used for Lathe work.
Recommend using Low RPM between
400 to 800

Kustom Grit Step 2

170mls
Kustom Grit Step 2: After wiping the piece clean
from Kustom Grit Step 1 apply Kustom Grit Step 2 with
paper towel or cloth to the work piece.
Use a cloth or Buffing pad to work the product into the piece.
After buffing use a clean piece of paper towel or cloth to wipe
any excess from the resin to give the resin the best finish.
The materials used will protect any wood used in the work
piece and the resin can be free from oils.
(For best results use a buffing pad to work Kustom Grit
into the work piece.
Kustom Grit can be applied by hand.)

Kustom Grit Can be used for Lathe work.
Recommend using Low RPM between
400 to 800