Kustom High Speed Polish Step 1 & 2

Kustom High Speed Polish

Available Sizes:

• 60 gram Bars
• 200 gram Bars

Kustom High Speed Polish is a food grade buffing/ polishing compound for use with any kind of buffing system.

Great for polishing virtually anything you want to polish on a buffing wheel.

We recommend wearing eye protection while buffing.

Kustom High Speed Polish Step 1 is rated at 50,000 grit

Kustom High Speed Polish Step 2 is rated at 100,00 grit

Kustom High Speed Polish Step 1 and 2 can also be used on a piece of leather as a strop, this can make a knife blade razor sharp and great for maintaining chisels, lathe tools, knives and anything you want to be razor sharp.

Kustom High Speed Polish Step 1:                               WEAR EYE PROTECTION

Use as buffing compound:

After preparing your piece to be polished with your buffing system of choice using clean or dedicated Step 1 buffing wheel or polisher turn the machine on and gently apply Kustom High Speed Polish Step 1 to the wheel, the friction and heat generated will apply the compound to the wheel.

Once Kustom High Speed Polish is applied to the wheel bring the piece to the wheel and gently work the piece until you have polished all surfaces.

Once you have finished polishing with Step 1 then wipe the piece to remove any excess Step 1 before moving on to Step 2 if required.

Kustom High Speed Polish is a food grade buffing/ polishing compound which works as a friction polish.
Provides a hard, long – wearing, durable gloss finish.

Use as friction polish:

After sanding to at least 400grit apply the bar of Kustom High Speed Polish Step 1 to the piece.

This is achieved by using a high enough RPM and moving the bar along the piece to generate heat to transfer the polish from the bar to the piece to be friction polished.

Colour it like a crayon.

Once Kustom High Speed Polish is applied using paper towel folded length ways (Use of fabrics at own discretion) work the polish into the piece
and then using clean sections of the paper towel work the piece until all the excess has been removed.

For higher level of gloss use Step 2.

Kustom High Speed Polish Step 2:                             WEAR EYE PROTECTION

Use as buffing compound:

After polishing with Kustom High Speed Polish Step 1 and wiping any excess, using your buffing system and a clean or dedicated buffing wheel or polisher turn the machine on and gently apply Kustom High Speed Polish Step 2 to the wheel, the friction and heat generated will apply the compound to the wheel.

Then proceed to polish the piece you are working on and once you have finished polishing with Step 2 then wipe the piece to remove any excess Step 2.

Kustom High Speed Polish is a food grade buffing/ polishing compound which works as a friction polish.
Provides a hard, long – wearing, durable high gloss finish.

Use as friction polish:

After Polishing with Kustom High Speed Polish Step 1 apply Kustom High Speed Polish Step 2 to the piece.

This is achieved by using a high enough RPM and moving the bar along the piece to generate heat to transfer the polish from the bar to the piece to be friction polished.

Colour it like a crayon.

Once Kustom High Speed Polish is applied using paper towel folded length ways (Use of fabrics at own discretion) work the polish into the piece
and then using a clean sections of the paper towel work the piece until all the excess has been removed.